Aerial view of a Lake Champlain Roofing crew re-roofing a large lakeside home

Free estimates · Since 1999

Roofs built for North Country winters.

Where quality starts at the top

Residential, commercial and industrial roofing contractor in Plattsburgh, NY. Our crews have done nothing but roofing and sheet metal since 1999. Inspection and written estimate at no cost.

Full re-roof under way, seen from above, from our project archive

Plattsburgh, NY
Years roofing the North Country
27
Google rating
4.5
Manufacturer certifications
9
Counties served
3

Winter here finds every weak point in a roof.

Heavy snow, weeks of freeze and thaw, and wind off the lake put more stress on a roof than almost anywhere else in the state. A roof that would last elsewhere can fail early here if the details are wrong.

Standing seam metal roof with snow on the ground beside it
Standing seam metal sheds snow instead of holding it
How an ice dam formsHeat from the attic melts snow on the upper roof. Meltwater runs down under the snow, refreezes at the cold eave, and the trapped water backs up beneath the shingles.Heat leaks up through the atticand warms the roof deckMeltwater runs downunder the snowRefreezes atthe cold eaveWater backs upunder the shingles
How an ice dam forms
  1. Snow sits on a warm roof

    Heat leaking through the attic warms the roof deck from below, and the snow on top starts to melt even when the air is well below freezing.

  2. Meltwater runs downhill

    Water runs beneath the snow toward the eave. There is no heated space under the overhang, so the roof there stays cold.

  3. It refreezes at the eave

    The water freezes into a ridge of ice along the edge of the roof. Every thaw and freeze adds another layer.

  4. Water backs up under the shingles

    New meltwater pools behind the dam, works up under the shingles, and shows up as a stain on the ceiling inside.

Freeze and thaw
Water that gets into a seam, a nail hole or a cracked flashing expands every time it freezes, widening the gap a little more each cycle.
Snow load
Wet snow is heavy. Flat and low-slope commercial roofs carry it for weeks, and drainage that works in summer can be blocked solid in January.
Wind and driven rain
Open exposure across the lake lifts poorly fastened shingles and pushes rain under ridge caps and around chimneys.

How a project with us works

Aerial view of a lakeside home with a new roof under fresh snow
Lakeside home under fresh snow, seen from above
  1. Step 1: Call us

    Tell us what you are seeing: a leak, storm damage, an aging roof, or a new build. We will set a time to come out.

  2. Step 2: We inspect the roof

    A roofer looks at the whole system on site: covering, flashing, ventilation, drainage and the sheet metal details.

  3. Step 3: You get a written estimate

    A clear scope and price, at no cost and with no obligation. Repair or replacement, whichever the roof actually needs.

  4. Step 4: A certified crew does the work

    Our own trained crews install the system. They hold manufacturer certifications for the products they put on your roof.

What we install and take care of

One crew for the whole roof: the covering, the flashing and trim from our own metal shop, and the maintenance that keeps it working through winter.

New architectural shingle roof seen from above

Residential roofing

Full replacements, new construction and re-roofs for houses, camps and multi-family buildings.

  • Asphalt shingle
  • Synthetic shingle
  • Standing seam metal
  • Natural slate
  • Synthetic slate
  • Wood shake
  • Copper standing seam
  • Skylights
Close-up of dark standing seam metal panels

Commercial and industrial

All commercial roofing applications for schools, businesses, municipal and industrial buildings.

  • Single-ply membrane systems (EPDM)
  • Flat and low-slope roofing
  • Coatings and waterproofing
  • Custom sheet metal
  • Standing seam metal
Stone house with a new roof and a Lake Champlain Roofing truck in the driveway

Repairs and maintenance

Leaks, storm damage and wear, fixed before they become a replacement.

  • Leak and storm-damage repair
  • Flashing and sheet metal repair
  • Maintenance programs
Farmhouse with a metal porch roof on a winter evening

Inspections and snow removal

Year-round service, including the part of the year that is hardest on a roof.

  • Roof inspections
  • Roof snow removal
  • Ice dam prevention

Not sure which system your building needs? A roofer will look and give you a straight answer.

Call (518) 562-9956

Custom sheet metal, made in our shop

Flashing, trim, drip edge, valleys and standing seam panels, fabricated in our own shop in Plattsburgh and formed to the roof they are going on. Contractors and homeowners can order custom metal from us directly, with or without installation.

  • Standing seam panels
  • Flashing and step flashing
  • Drip edge and fascia
  • Valleys and ridge caps
  • Custom trim and chimney caps
  • Copper and painted steel
New-construction dormer wrapped in custom dark sheet metal trim and fascia

Why property owners in the North Country call us

Rated 4.5 out of 5 on Google. Read the reviews.
Best of BusinessRate 2024 award plaque for Lake Champlain Roofing, roofing contractor, Plattsburgh

Best of BusinessRate 2024

Named a Best of BusinessRate 2024 roofing contractor for Plattsburgh, a ranking based on recent customer reviews.

Roofing since 1999
More than two decades of roofs in Plattsburgh and the surrounding counties, through every kind of winter.
Roofing is all we do
We specialize solely in roofing and sheet metal, so every crew, tool and truck is set up for roofs.
Product-certified crews
Our roofers are trained and hold certifications for the systems they install, which is what manufacturer warranties depend on.
Insured, certified, warrantied
We are a certified roofing contractor carrying proper insurance, and our work comes with a full warranty alongside the manufacturer product warranty.
Free written estimates
A roofer inspects the whole roof and gives you a written scope and price at no cost and with no obligation.
Our own sheet metal shop
Flashing, trim and standing seam panels are fabricated in-house, so the metal details fit the roof they are made for.

Trained and certified to install

Certified installation is what manufacturer warranties depend on.

  • CertainTeed
  • Carlisle SynTec
  • GAF
  • DaVinci Roofscapes
  • Owens Corning
  • Velux
  • Tamko
  • Englert
  • Siplast

Recent work

  • Large residence with a new roof under a blue sky
    Lakeside residenceResidential re-roof
  • Aerial view of a re-roof in progress
    Full tear-off, seen from aboveResidential
  • Standing seam metal roof beside a snow-covered yard
    Standing seam in winterMetal roofing
  • Crew trucks at a residential re-roof
    Crew on siteResidential re-roof
  • Farmhouse with a metal porch roof in winter
    Farmhouse porch roofMetal roofing

What every estimate includes

Estimates are free and carry no obligation.

  • An on-site inspection of the whole roof system
  • A written scope and price at no cost
  • A straight answer on repair versus replacement
  • The roofing system options that fit your building and budget
  • Sheet metal details fabricated in our own shop
  • Installation by our own trained, product-certified crews
  • A full warranty on the work, from a properly insured contractor
It wasn't a rushy rushy job. It was a quality job we are proud of. Gil and Bryan were great people. That same spirit extended to the people doing the work.
Joseph · Cure cottage re-roof
  • “They communicated clearly both from the office and in the field. They ran a clean job site and did high quality work for a fair price.”

    James

  • “Despite the huge job (well over 4500 square feet of roof!) they got it done in just about 2 weeks. Very professional, detail oriented and well organized.”

    Alex

  • “They were the only company who actually returned my call. They also did everything they said they’d do. There were no surprises and everything was done on time!”

    Gayellen

  • “They knew with winter coming it could be a problem, with that they squeezed us in. The work was done well, priced accordingly and his team cleaned up afterwards like they were not there.”

    Lawrence

  • “They were quick, efficient and friendly and were great about cleaning up everyday, the roof looks great!”

    Ashley

  • “Having a damaged roof can be quite stressful, but getting it addressed with the LCR team was a great experience.”

    Matthew

  • “Their prices were very competitive and very fair. They know their stuff and their work is impeccable.”

    Pamela

  • “They did the new roof when they said they would and did an excellent job. … I would definitely hire them again.”

    Guy

  • “Great company, they are the best in the area.”

    Ryan

Questions we hear most

Anything else, call (518) 562-9956 and ask for the office.

Do you charge for an estimate?

No. We come out, inspect the roof and give you a written estimate at no cost and with no obligation.

Do you do repairs, or only full replacements?

Both. If a repair will genuinely solve the problem, that is what we will recommend. If the roof is at the end of its life, we will tell you that too and explain why.

What roofing materials do you install?

Asphalt shingle, synthetic shingle, standing seam metal, natural slate and synthetic slate for residential work, plus commercial roofing systems, coatings and waterproofing. We fabricate custom sheet metal in our own shop.

Do you work on commercial and industrial buildings?

Yes. Commercial and industrial roofing is a core part of our work, alongside residential.

Are your crews certified?

Our roofers are trained and hold manufacturer certifications for the products they install. Certified installation is typically a condition of manufacturer warranties.

Do you remove snow from roofs?

Yes. Roof snow removal is one of our year-round services and helps prevent ice dams and structural strain during heavy winters.

Which roofing material is right for my roof?

Not every material suits every roof. A flat or low-slope roof needs a different system, such as a single-ply membrane or coating, than a steep-pitched roof that can take shingle, metal or slate. Style, colour and cost all factor in, and several options now carry green attributes such as ENERGY STAR ratings or recycled content. We look at your roof and walk you through the choices that fit it.

Are you insured, and is the work warrantied?

Yes. Lake Champlain Roofing is a certified roofing contractor carrying proper insurance, and our work comes with a full warranty in addition to the manufacturer warranty on the products we install.

Can I order custom sheet metal from you?

Yes. Our sheet metal shop fabricates flashing, trim, drip edge, valleys and standing seam panels. Call with your dimensions and finish and we will quote the order, whether or not we are installing it.

When do you book roof installations?

Roof replacements and new installations book for the spring-to-fall season, and slots fill early, so call ahead. Repairs, inspections and roof snow removal run year round.

What area do you serve?

We are based in Plattsburgh, NY and serve Clinton, Franklin and Essex Counties and the surrounding North Country. Call us and we will confirm whether we cover your location.

Get your roof looked at before the next winter does.

Call or stop by the shop on Route 9. A roofer will inspect your roof and give you a written estimate at no cost.

7631 US-9, Plattsburgh, NY 12901. Mon–Fri 8:00 AM – 4:00 PM.